Effective ways to clean tile and grout for Perth homes
There are many ways to clean the grout between tiles. Mostly, people want to do the job right the first time. You can ask a tile and grout cleaning specialist in Perth. You can also try some helpful hints to give the grout in your bathroom or kitchen a new look.
But first, let’s discuss what the factors that make the tile dirty.
– Dust and grime from shoes
Most grout is a pale shade of ivory or light gray. It tends to collect household dust and sometimes grime from the bottom of shoes.
When the bathroom gets damp, due to the moisture from showering or bathing, the dirt and dust tends to stick to the grout lines.
There are several ways to clean light colored grout between tiles. If you prefer not to use bleach, it is not necessary. There are plenty of other ways to get the tile and grout sparkling clean. Most of them do not include using harsh smelling chemical cleaners.
Here are several DIY techniques to clean grout in bathroom or kitchen tiles. These tips work for both floor and wall tile grout.
– Mild soap and water
Mild soap and water, with a stiff brush or nylon scrubber is the easiest way to clean grout. If possible, try to let the mild soapy solution sit on the grout for a few minutes. If needed, scrub the grouted areas gently. Wipe dry with a clean cloth.
– Vinegar and water
Use one part white vinegar and one part water. You can mix it in a spray bottle. This makes application of the solution easier. Using a spray bottle may also help you get hard to reach spaces. After the vinegar and water has soaked for 10 to 15 minutes, use a brush to scrub. Then wipe off the solution with a dry cloth. The white vinegar solution is good for removing grease and grime.
– Baking soda paste
Baking soda is good for several household cleaning jobs. It works equally well for scrubbing the dirt and grime from grout. It is not toxic and will not leave any odors when the job is done.
– Baking soda and vinegar
For tougher grout cleaning jobs, sprinkle on the baking soda, along the grout line. Then, pour the white vinegar onto the baking soda. This produces a foaming action that can help remove stubborn grime. Scrub with a brush or scrubber after the solution stops bubbling. Rinse, and then wipe off with a dry cloth or dry mop.
– Baking soda and peroxide
These two ingredients are commonly found in laundry detergents. They work together to tack tough cleaning jobs. Apply the baking soda along grout lines. Spray on hydrogen peroxide. Let the solution fizz and bubble until it stops. Scrub and wipe dry.
– Bleach and soda
For extremely difficult grout cleaning jobs, use baking soda and bleach. Mix two parts soda to one part bleach. Work the paste along grout lines with a stiff brush. Wait about 5 minutes. Rinse, then wipe dry.
To prevent dirt and grime from building up in grout lines, plan on a weekly cleaning. Keep a spray bottle with equal parts white vinegar and water. Spray after showering or during your regular cleaning routine. For more tips, consult a tile and grout cleaning specialist in Perth.